ADJ Quad Phase HP - Page 11

Quad Phase HP System Menu
LED - With this function you can switch the LED on or off via the control board.
1. Press the either the MENU button until “LED” is displayed, press ENTER.
2. The display will show either “ON” or “OFF”. Press the UP or DOWN buttons to select
“ON” to switch on the LED, or “OFF” to switch off the LED.
3. Press ENTER to conrm and exit.
DISP - This function will reverse the display 180º.
1. Pres the either the MENU button until “DISP” is displayed, press ENTER.
2. Press the UP button to select “DSIP” to activate this func- tion, or “DISP” to deactivate
this function.
3. Press ENTER to conrm.
TEST - This function will run a self test program.
1. Press the MENU button until “TEST” is displayed, press ENTER.
2. The unit will now run a self test. Press the MENU button to exit.
TEMP - With this function you can display the running temperature of the unit.
1. Press the MENU button until “TEMP” is displayed, press ENTER.
2. The current running temperature of the xture will now be displayed. Press MENU to
exit.
FHRS - With this function you can display the running time of the unit.
1. Press the either the MENU button until “FHRS” is displayed, press ENTER.
2. The display shows the running time of the unit. Press MENU to exit.
VER - Use this function to display the Software version of the unit.
1. Press the either the MENU button until “VER” is displayed, press ENTER.
2. The display will show the software version.
ADJ Products, LLC - www.adj.com - Quad Phase HP - User Manual - Page 11