ADJ STINGER - General Information; Unpacking; Introduction; Customer Support

ADJ Products, LLC - www.adj.com - Stinger Instruction Manual Page 3
ADJ Products, LLC - www.adj.com - Stinger Instruction Manual Page 2
Stinger Features
Caution! There are no user serviceable parts inside this unit. Do not
attempt any repairs yourself, doing so will void your manufactures
warranty. In the unlikely event your unit may require service please
contact ADJ Products, LLC.
During operation the housing may become extremely hot. Avoid
touching the unit with bare hands while in use.
ADJ Products, LLC will not accept any liability for any resulting dam-
ages caused by the non-observance of this manual or any unauthor-
ized modication to this unit.
Stinger Handling Precautions
Stinger Warranty Registration
The Stinger carries a 1 Year limited warranty. Please fill out the
enclosed warranty card to validate your purchase and warranty. You
may also register your product online at www. americandj.com. All
returned service items whether under warranty or not, must be freight
pre-paid and accompany a return authorization (R.A.) number. If the
unit is under warranty you must provide a copy of your proof of pur-
chase invoice. Please contact ADJ customer support for a R.A. num-
ber.
To optimize the performance of this product, please read these
operating instructions carefully to familiarize yourself with the basic
operations of this unit. These instructions contain important safety
information regarding the use and maintenance of this unit. Please
keep this manual with the unit, for future reference.
Stinger General Instructions
• DMX-512 Protocol Compatible (10 DMX Channels)
• RGBWAP Hex LED’s
• Green & Red Lasers
• 3 Operating Modes - Sound Active, Auto Run, & DMX Control
• Internal Microphone
• Digital Display for Address and Function Setting
• Power Cord Daisy Chain
Stinger General Information
Unpacking: Thank you for purchasing the Stinger by ADJ Products,
LLC. Every Stinger has been thoroughly tested and has been shipped
in perfect operating condition. Carefully check the shipping carton for
damage that may have occurred during shipping. If the carton appears
to be damaged, carefully inspect your xture for any damage and be
sure all equipment necessary to operate the unit has arrived intact. In
the event damage has been found or parts are missing, please contact
our toll free customer support number for further instructions. Please
do not return this unit to your dealer without contacting customer sup-
port rst.
Introduction: The Stinger is a 10 channel, DMX intelligent LED moon-
flower, strobe, & laser fixture. The fixture can operate in as a stand
alone fixture or in a Master/Slave configuration. The Stinger has two
operating modes; sound active and DMX Control. For best results use
fog or special effects smoke to enhance the beams projections.
Customer Support: ADJ Products, LLC provides a toll free cus-
tomer support line, to provide help and to answer any question should
you encounter problems during your set up or initial operation. You
may also visit us on the web at www.adj.com for any comments or
suggestions. Service Hours are Monday through Friday 8:00 a.m. to
4:30 p.m. Pacic Standard Time.
Voice: (800) 322-6337
Fax: (323) 582-2941
E-mail: support@adj.com
Warning! To prevent or reduce the risk of electrical shock or re, do
not expose this unit to rain or moisture.
Caution! This may cause eye damage. Avoid looking directly into the
light source. Use sensible precaution.