Adleepower AP2G3-337 - User Manual

Questions and Answers

L
Lori FieldsAug 19, 2025
What to do if my Adleepower AP2G3-337 Inverter shows PF01 error?
- A
  Audrey McdanielAug 19, 2025
  If your Adleepower Inverter displays the error code PF01, it could be due to several reasons. It may be caused by a power device failure during acceleration, which can be solved by increasing the acceleration time. Alternatively, it might be due to boost voltage being too high, in which case, reduce CD21 contents. Another possibility is that the motor is locked, or the load is too heavy; try reducing the load factor. Finally, disconnect the output wiring U.V.W. Restart (Run) the inverter and check for the same message, if the problem persists, repair the inverter.
C
Cesar JohnsonAug 21, 2025
What to do if my Adleepower AP2G3-337 shows PF02 error?
- G
  George GilmoreAug 21, 2025
  If your Adleepower Inverter displays the error code PF02, it could be due to a power device failure during constant frequency operation. To resolve this, eliminate sudden changes in load. Another cause could be high ambient temperature; try reducing the ambient temperature.
S
srossAug 25, 2025
What to do if my Adleepower AP2G3-337 shows PF03 error?
- M
  Michelle ScottAug 25, 2025
  If your Adleepower Inverter displays the error code PF03, it indicates a power device failure during deceleration. To fix this, set the deceleration time suitable for load GD2. Also, this error can be caused by the power supply voltage being too high, so reduce the voltage within the specified range.
H
hperezAug 26, 2025
What to do if my Adleepower AP2G3-337 shows PF04 error?
- D
  David LeonAug 26, 2025
  If your Adleepower Inverter displays the error code PF04, it means there's a power device failure during stand-by. You should remove the cause and reduce the voltage.
E
Ellen FisherAug 28, 2025
What to do if my Adleepower AP2G3-337 Inverter shows EEP1 error?
- C
  Carla LoweAug 28, 2025
  If your Adleepower Inverter displays the error code EEP1, it indicates an EEPROM access error. The suggested solution is to repair the inverter.
M
Miss Bailey LynchAug 30, 2025
What to do if my Adleepower Inverter displays PF01?
- J
  Jennifer WhiteAug 30, 2025
  If your Adleepower Inverter displays PF01, it indicates a power device failure during acceleration, boost voltage being too high, a locked motor or an excessively heavy load, or a disconnection in the output wiring. You can try increasing the acceleration time, reducing CD21 contents, or reducing the load factor. If the problem persists after checking the output wiring (U.V.W.) and restarting the inverter, consider repair.
A
Andre BryantSep 1, 2025
What does it mean when my Adleepower Inverter shows PF02?
- C
  Carol BrooksSep 1, 2025
  A PF02 error on your Adleepower Inverter signals a power device failure during constant frequency operation, or that the ambient temperature is too high. To resolve this, eliminate sudden changes in load and reduce the ambient temperature.
S
Stephanie SmithSep 3, 2025
What to do if my Adleepower Inverter displays PF03?
- D
  Daniel HardySep 3, 2025
  If your Adleepower Inverter is showing PF03, it means there's a power device failure during deceleration, or the power supply voltage is too high. You should set the deceleration time suitable for load GD2 and reduce the voltage within the specified range.
P
Paul LeeSep 5, 2025
What does PF04 mean on my Adleepower Inverter?
- B
  Brian HunterSep 5, 2025
  A PF04 error on your Adleepower Inverter indicates a power device failure during stand-by. You should remove the cause and reduce the voltage.
B
burnettjerrySep 7, 2025
What does LOLO mean on my Adleepower Inverter?
- B
  Brian VazquezSep 7, 2025
  If your Adleepower Inverter displays LOLO, it indicates low voltage. Try increasing the input voltage and reducing the load.

Adleepower AP2G3-337 Specifications

General

Model	AP2G3-337
Category	Inverter
Output Power	300W
Peak Power	600W
Input Voltage	12V DC
Output Voltage	110V AC
Frequency	60Hz
Efficiency	90%
USB Output	5V/2.1A
Protection	Overload, Overheat, Short Circuit