To Next Page
J
Jessica WatsonSep 10, 2025
Why is there no display on my Adleepower Inverter?
- NNathan DavisSep 10, 2025
If there is no display on your Adleepower Inverter, the discharge LED is extinguished. Turn on or replace the MCCB.
Why is there no display on my Adleepower Inverter?
If there is no display on your Adleepower Inverter, the discharge LED is extinguished. Turn on or replace the MCCB.
What does UPLO mean on my Adleepower Inverter?
If your Adleepower Inverter displays UPLO, it means there is an open U.V.W. Check the output U.V.W. circuit or setting CD93=0.
What does LOSE mean on my Adleepower Inverter?
If your Adleepower Inverter displays LOSE, it indicates a communication loss or error. Check the communication circuit or communication code.
What does EEP1 mean on my Adleepower Inverter?
If your Adleepower Inverter displays EEP1, it indicates an EEPROM access error. Consider repair.
General| Model | AP2G3-337 |
|---|---|
| Category | Inverter |
| Output Power | 300W |
| Peak Power | 600W |
| Input Voltage | 12V DC |
| Output Voltage | 110V AC |
| Frequency | 60Hz |
| Efficiency | 90% |
| USB Output | 5V/2.1A |
| Protection | Overload, Overheat, Short Circuit |
