ADS-tec IF1100 - Interface Overview; Power Supply 24 VDC; Backup

IF1000 series 33
© ads-tec GmbH • Heinrich-Hertz-Str. 1 • D-72622 Nürtingen
5.7 Interface Overview
Abb.
7
:
The device has the following interfaces (front):
1. Power 24V DC voltage supply (2 pole COMBICON plug)
2. Backup 24V DC BACKUP voltage supply (2 pole COMBICON plug)
3. CUT& ALARM plug (4 pole COMBICON plug)
4. LAN-in with RJ45 (PoE) or LWL fibre optic connection
5. 9 pole SUB-D connector / RS232
6. LAN-out with 4x RJ45 connection
Note:
All input voltages can be hooked up redundantly (Power, Backup and PoE
via LAN-in).
5.7.1 Power Supply 24 VDC / BackUp
The supply voltage implements a lead-through terminal with screw connection (the illustration shows the
jack provided in the device))
Pin-Number
Signal-Name
1
24V DC
2
0 V DC
PIN 1: = L+ 24V DC Power Supply
PIN 2: = GND Ground