ADS V3 - Managing Electromagnetic Interference; Product Overview

Instruction Manual
www.adsdental.com
- 6 -
Flammable Gases
ADS products are not suitable for
use in environments with ammable
anesthetic gas mixtures per IEC
60601-1. Do not operate in closed
spaces where ammable gases may
accumulate.
NOTE
The mains voltage supplied to the
equipment must remain within ±10%
of the rated voltage at all times during
operation. Voltage uctuations outside
of this range may damage components
or cause unexpected shutdowns.
Managing Electromagnetic
Interference
ADS designs and manufactures mechanical room systems
to minimize electromagnetic interference (EMI) with other
electrical devices. However, if EMI is detected between the
vacuum system and another device:
1. Relocate the interfering device outside of the room if
possible.
2. Connect the device to an isolated electrical circuit.
3. Increase distance between the vacuum system and inter-
fering device within the room.
4. Contact an authorized ADS dealer for support if interfer-
ence persists despite these mitigation attempts.
PRODUCT OVERVIEW
2
7
8
9
3
1
4
5
6
Item Description
1 Vacuum Lid
2 Vacuum Level Indicator
3 Vacuum Lid Latch
4 Main Power Button
5 Washdown Waterline
6 Pressure Sensor
7 Intake Outlet
8 Drain Outlet
9 Exhaust Outlet