ADT DSC 9047 User Manual

DSC 9047 Quick Guide
https://alpha.adt.com/help/144[11/12/2018 10:33:41 PM]
DSC 9047 - Quick Guide
For a detailed review of the entire system, please view the DSC 9047 manual.
« Help Center
Arm &
Disarm the
System
Battery Bypass
Protected
Areas
Date &
Time
Settings
Chimes &
Beeps
Reset Security
Codes
Trouble
Conditions
Volume
Arm and Disarm
Arm:
To arm all sensors in AWAY mode when you are leaving the premises, press and hold the [AWAY]
key for two seconds or enter your [security code] and exit before the exit delay expires.
To arm all sensors in STAY mode without interior sensors armed, press and hold the [STAY] key for
two seconds or enter your [security code] and do not leave the premises.
Disarm:
To disarm, enter your [security code] before the entry delay expires.
Select

ADT DSC 9047 Specifications

General

Brand	ADT
Model	DSC 9047
Category	Security System
Language	English

Summary

Arm & Disarm the System

Arm

To arm all sensors in AWAY mode when leaving premises or STAY mode without interior sensors armed.

Disarm

To disarm the system, enter your security code before the entry delay expires.

Battery

Bypass Protected Areas

To bypass a zone

Enter function menu, select zone, enter zone number or use keys, press [*] to bypass.

To unbypass

Repeat bypass procedure or arm and disarm system to unbypass zones.

Change Date and Time

Chimes and Beeps

Security Codes

To program a new user

Program new user codes by entering master code, user number, and new code.

To erase an access code

Erase an existing access code by entering master code and user access code.

Trouble Conditions

To view the Trouble Condition

View trouble conditions by pressing [*]+[2] and using [<>] to scroll.

To silence the Trouble Condition beeps

Silence trouble condition beeps by pressing [#].

Volume