–
6
–
PAGER OPTIONS 160-172
✱
160
PAGER 1 PHONE No.
| | | | | | | | | | | | | | | | | | |
Enter up to 20 digits. 0–9; #+11 = '
✱
'; #+12 = '#'; #+13 = 2-second pause.
✱
161
PAGER 1 CHARACTERS
| | | | | | | | | | | | | | |
Enter the optional prefix characters, up to 16 digits.
0–9; #+11 = '
✱
'; #+12 = '#'; #+13 = 2-second pause.
✱
162
PAGER 1 REPORTING OPTIONS
Part. 1 Part. 2 common
[0,0,0]
For each partition, select from the following options:
0 = no reports sent
1 = Open/closes all users
4 = All alarms and troubles
5 = All alarms / troubles, and open/closes for all users
12 =Alarms / troubles for zones entered in zone list 9
13 =Alarms / troubles for zones entered in zone list 9,
and open\closes for all users
✱
163
PAGER 2 PHONE No.
| | | | | | | | | | | | | | | | | | |
Enter up to 20 digits. 0–9; #+11 = '
✱
'; #+12 = '#'; #+13 = 2-second pause.
✱
164
PAGER 2 CHARACTERS
| | | | | | | | | | | | | | |
Enter the optional prefix characters, up to 16 digits.
0–9; #+11 = '
✱
'; #+12 = '#'; #+13 = 2-second pause.
✱
165
PAGER 2 REPORTING OPTIONS
[0,0,0]
Part. 1 Part. 2 common
See field *162 for reporting options. Select for each
partition (use zone list 10 if using options 12 or 13).
✱
166
PAGER 3 PHONE No.
| | | | | | | | | | | | | | | | | | |
Enter up to 20 digits. 0–9; #+11 = '
✱
'; #+12 = '#'; #+13 = 2-second pause.
✱
167
PAGER 3 CHARACTERS
| | | | | | | | | | | | | | |
Enter the optional prefix characters, up to 16 digits.
0–9; #+11 = '
✱
'; #+12 = '#'; #+13 = 2-second pause.
✱
168
PAGER 3 REPORTING OPTIONS
0,0,0]
Part. 1 Part. 2 common
See field *162 for reporting options. Select for each
partition (use zone list 11 if using options 12 or 13).
✱
169
PAGER 4 PHONE No.
| | | | | | | | | | | | | | | | | | |
Enter up to 20 digits. 0–9; #+11 = '
✱
'; #+12 = '#'; #+13 = 2-second pause.
✱
170
PAGER 4 CHARACTERS
| | | | | | | | | | | | | | |
Enter the optional prefix characters, up to 16 digits.
0–9; #+11 = '
✱
'; #+12 = '#'; #+13 = 2-second pause.
✱
171
PAGER 4 REPORTING OPTIONS
[0,0,0]
Part. 1 Part. 2 common
See field *162 for reporting options. Select for each
partition (use zone list 12 if using options 12 or 13).
✱
172
PAGER DELAY OPTION FOR ALARMS
[3]
0 = none, 1 = 1 minute, 2 = 2 minutes, 3 = 3 minutes
This delay is for ALL pagers in the system.
NOTE:
The delay does not reset for new alarms
occurring while an existing pager delay is in progress.
REPORTING OPTIONS 173-177
✱
173
RF REPORTING OPTIONS
[3]
0 = disable all options
1 = RF Tamper reports during disarm
2 = RF button types send low battery
8 = RF low battery reports delayed (delayed 28 days)
Example:
Entering “10” (8 + 2) enables button-type
transmitters to send low battery reports and delay all
reports for 28 days. UL: see Inst. Instr. for requirements
✱
174
CLEAN ME REPORTING OPTIONS
(for ESL smoke detectors)
[0]
0 = disable; 1 = Clean Me signal reports;
2 = Clean Me reports, 28-day enabled.
Note:
If Clean Me is enabled, you must enter “3” in
field
✱
56 programming for zone 1 response time.
✱
175
UP AND ABOUT TIME
[0]
0 = none, 1 = 1 hour, 2 = 2 hours,… 15 = 15 hours
(hourly increments)
✱
176
LACK OF USAGE OPTION
[0]
1–15 = number of weeks selected (1 week increments)
If panel is not armed within the time period selected, a
report will be sent to the central station.