Adtech ADT-CNC4640 User Manual

Adtech CNC Technology Co., Ltd. 11. System parameters
- 71 -
015 sys language bag
Range : 0~1
Unit : None
Authority : Operation admin
Default : 0 (Chinese)
Effective time : Instant
Note : Select system language
Chinese
English
016 macro key word valid En
Range : 0~1
Unit : None
Authority : Operation admin
Default : 0 (Chinese)
Effective time : Instant
Note : Macro keyword effective parameter is used to set whether the macro
expression symbol on the membrane is valid (1: valid, 0: invalid).
017 startup picture display
Range : 0~6
Unit : None
Authority : Operation admin
Default : 1S
Effective time : Instant
Note : Used to configure the display mode of the logo; if it is set to 0, the user
needs to press any key to enter the system; for any other value, the system
delays for corresponding time and enters automatically.
018 sys display axis setting
Range :
Unit : None
Authority : Super user
Default : XYZ
Effective time : Instant
Note : Used to configure the display axis of current system, and different display
combinations are available.
This configuration only determines the content of the interface. If the axis
function of the hardware exists, it still can output axis control during
programming, but the axis status won’t be displayed. The status such as
axis limit and alarm will be ignored.
019 sys debug information En
Range : 0~1
Unit : None
Authority : Super user
Default : OFF/0
Effective time : Instant
Note : Used to configure whether RS232 of current system outputs the testing info
while program is running.
This parameter is dedicated for programmers, and the users are not
suggested using this parameter.
If the testing info is enabled, the system performance will be lowered, and
therefore it is disabled during normal processing.
If networking is enabled, this function must be disabled, or else the
networking will fail.

Adtech ADT-CNC4640 Specifications

General

Brand	Adtech
Model	ADT-CNC4640
Category	Controller
Language	English