What to do if my Advanced Instruments Medical Equipment says 'Out of range High'?
If your Advanced Instruments Medical Equipment displays an 'Out of range High' error, it could be due to the sample being above the instrument's range. First, ensure the sample is correctly present in the sampler. Then, test the solenoid and clean the sample probe. You may also test a control, such as Clinitrol, to see if the issue persists.
What to do if my Advanced Instruments OsmoTECH Medical Equipment displays 'Out of range Low'?
If your Advanced Instruments Medical Equipment shows an 'Out of range Low' message, it indicates that the sample might be outside the instrument's range. To resolve this, test a control such as Clinitrol and check the sample for particulate matter.
What to do if Advanced Instruments OsmoTECH Medical Equipment shows 'Test timeout'?
If your Advanced Instruments Medical Equipment displays a 'Test timeout' error, it means the instrument couldn't complete the test in the allotted time. You can check the sample for particulate matter. Also, testing a control such as Clinitrol might help determine if the issue persists. If the problem continues, the sample might be outside the range of the instrument.
What to do if the sample did not freeze in my Advanced Instruments OsmoTECH Medical Equipment?
If the sample did not freeze in your Advanced Instruments Medical Equipment, it might have frozen prematurely. Try re-running a new sample using a known control such as Clinitrol. Additionally, check the sample for particulate matter and clean the sample probe with a chamber cleaner dampened with water.
What to do if my Advanced Instruments OsmoTECH Medical Equipment says 'AI consumable box not detected'?
If your Advanced Instruments Medical Equipment displays the message 'AI consumable box not detected', place a test kit on the instrument and close the printer door.
How to fix 'Printer offline' error on Advanced Instruments Medical Equipment?
To fix a 'Printer offline' error on your Advanced Instruments Medical Equipment, replace the printer paper and connect the printer.
General| Brand | Advanced Instruments |
|---|---|
| Model | OsmoTECH |
| Category | Medical Equipment |
| Language | English |
To Next Page
