43 ADAM-6200 User Manual
Chapter 4 System Configuration
Case 2. If you want to duplicate your module's configuration to others.
(Before launching it, you need to export the configuration file to your computer in
advance)
1. Select Configuration.
2. Select I/O module
3. Click Browse button to import the configuration file from your computer.
4. Choose which module you're going to change its setting and enter password.
5. Click Apply button to activate it, and then you will see the operating progress on
the Status area.
Note! Do not remove the power of your module when group configuration
function is processing. Otherwise, the module system will probably
crash.
To Next Page
Loading...
Need help?
General
