AIMB-581 User Manual 32
3.1 Introduction
AMI BIOS has been integrated into many motherboards, and has been very popular
for over a decade. People sometimes refer to the AMI BIOS setup menu as BIOS,
BIOS setup or CMOS setup.
With the AMI BIOS Setup program, you can modify BIOS settings and control the
special features of your computer. The Setup program uses a number of menus for
making changes and turning special features on or off. This chapter describes the
basic navigation of the AIMB-581 setup screens.
3.2 BIOS Setup
The AIMB-581 Series system has AMI BIOS built in, with a CMOS SETUP utility that
allows users to configure required settings or to activate certain system features.
The CMOS SETUP saves the configuration in the CMOS RAM of he motherboard.
When the power is turned off, the battery on the board supplies the n essary power
to preserve the CMOS RAM.
When the power is turned on, press the <Del> button during the BIOS POST (Power-
On Self Test) to access the CMOS SETUP screen.
Control Keys
< ↑ >< ↓ >< ← >< → >
Move to select item
<Enter> Select Item
<Esc>
Main Menu - Quit n not save changes into CMOS
Sub Menu Exit urrent page and return to Main Menu
<Page Up/+> Increase he numeric value or make changes
<Page Down/-> Decrea e the numeric value or make changes
<F1> Gene al help, for Setup Sub Menu
<F2> Item Help
<F5> Load Previous Values
<F7> Load Setup Defaults
<F10> Save all CMOS changes
To Next Page
Loading...
Need help?
General
