63 AIMB-581 User Manual
Chapter 3 BIOS Operation
3.7 Save & Exit Configuration
Save Changes and Exit
When users have completed system onfiguration, select this option to save
changes, exit BIOS setup menu and eboot the computer to take effect all sys-
tem configuration parameters
1. Select Exit Saving Changes rom the Exit menu and press <Enter>. The follow-
ing message appears: Save Configuration Changes and Exit Now? [Ok] [Can-
cel]
2. Select Ok or cancel
Discard Changes and Exit
Select this opti n to quit Setup without making any permanent changes to the
system configuration.
1. Selec Exi Discarding Changes from the Exit menu and press <Enter>. The fol-
lowing message appears: Discard Changes and Exit Setup Now? [Ok] [Cancel]
2. Selec Ok to discard changes and exit. Discard Changes
Select Discard Changes from the Exit menu and press <Enter>.
Restore Default
The BIOS automatically configures all setup items to optimal settings when
users select this option. Defaults are designed for maximum system perfor-
mance, but may not work best for all computer applications. In particular, do not
use the Defaults if the user's computer is experiencing system configuration
problems. Select Restore Defaults from the Exit menu and press <Enter>.
Save as User Default
Save the all current settings as a user default.
Restore User Default
Restore all settings to user default values.
Boot Override
Shows the boot device types on the system.
To Next Page
Loading...
Need help?
General
