Advantech LNC M6800 Series User Manual

Milling Machine Series
Control panel operations
177
Advantech-LNC Technology Co., Ltd.
The second operating panel
2.2 LED signal light (LED SIGNAL)
M6800 series
1: All axes have returned to the reference point.
2: The light will come on automatically after the power is turned on.
3: The light will come on automatically when an alert is issued by the controller.
4: The light will automatically turn on when the level of grease is too low.
5: Insufficient air pressure.
6: Tool magazine malfunction.
M5800 series
1: All axes have returned to the reference point.
2: The light will come on automatically when an alert is issued by the controller.
3: The light will come on automatically after the power is turned on.
4: The light will come on automatically the I/O axis card has successfully performed a self-hardware circuit test.

Advantech LNC M6800 Series Specifications

General

Brand	Advantech
Model	LNC M6800 Series
Category	Power Tool
Language	English