Advantech LNC M6800 Series User Manual

Milling Machine Series
CNC operations
90
Advantech-LNC Technology Co., Ltd.
1.7.8 System update
Description of the system update function:
 The controller can perform system software update via a USB device.
Instructions for system update:
 After using the <MAINTE> on the MDI panel to switch to maintenance group, the 【System update】 key can be
pressed to access the system update page.
 After entering the system update page, the USB drive containing system software should be inserted into the
USB interface on the control panel, then select the 【Confirm】 key for the system to read the USB device. After
selecting the folder where update file is located, the update version will be displayed on the screen. After
confirmation has been given, system update can be completed by following instructions on the screen. The
system will be automatically restart after update, and system update will be completed.
 For detailed instructions, please refer to section 1.8 for instructions on how to perform a System Update

Advantech LNC M6800 Series Specifications

General

Brand	Advantech
Model	LNC M6800 Series
Category	Power Tool
Language	English