Advantech LNC M6800 Series User Manual

Milling Machine Series
CNC operations
39
Advantech-LNC Technology Co., Ltd.
4. Press Confirm to close the window and then press the program start (CYCLE START) key for the
tool to move to the coordinate position of that block and stop at 20 mm above the workpiece; a
confirmation window will also pop up. Press Confirm to start the tool and continue with
machining.
 For detailed instructions, please refer to section 1.8 for instructions on how to perform a Program Restart
1.4 Program group (PROG)
1.4.1 Select a file to be opened
Instructions on file management:
 Opening a new file: Users can use the <PROG> key on the MDI panel to switch to editing group before pressing
the 【Open new file】 key for the window requesting a new filename to appear. After entering a new filename
and selecting Confirm, the open new file operation is completed, or users can select Cancel to return to the
previous page.

Advantech LNC M6800 Series Specifications

General

Brand	Advantech
Model	LNC M6800 Series
Category	Power Tool
Language	English