Advantech LNC M5800 Series User Manual

A-LNC Milling
Machine Series
Operation Manual
Leading Numerical Controller
Version: V01.00.003(4408230007)
Advantech-LNC Technology Co., Ltd.

Advantech LNC M5800 Series Specifications

General

Brand	Advantech
Model	LNC M5800 Series
Category	Power Tool
Language	English

Summary

1 CNC Operations

1.1 Type of Operation Device

Describes the components of the operation panel: LCD, MDI, OP panels.

1.2 Screen and Function Instructions

Explains the 5 function groups (Monitoring, Program, Offset, Diagnosis, Maintenance).

1.3 Monitoring Group (MONITOR)

Details information displayed on the monitoring page and various fields.

1.3.8 MDI

Describes MDI panel functions for editing and setting values.

1.4 Program Group (PROG)

Covers program management, including file selection and editing.

1.4.1 Select a File to be Opened

Instructions for opening new and existing files for program editing.

1.4.4 Program Editing

Program modification through editing machining program commands.

1.4.5 File Management

Deleting, renaming, copying, exporting, and importing machining programs.

1.5 Compensation Group (OFFSET)

1.5.1 Coordinate System

Setting up workpiece coordinate systems (G54-G59, G54P1-P100).

1.5.2 Tool Management

Manually entering numerical values for different tool types via offset screen.

1.5.6 Automatic Tool Alignment

Measuring tool tip distance for automatic tool length offset calculation.

1.6 Diagnosis Group (DGNOS)

1.6.1 Alerts and Warnings

Recording and displaying alerts and warnings during system operation.

1.6.5 System Information

Examining system operation, machine coordinates, and memory status.

1.7 Maintenance Group (MAINTE)

1.7.1 User Parameters

Setting parameters related to PLC, software limits, RAPID, JOG, and hand wheel.

1.7.3 Network Settings

Connecting PC via ReCON software for file transfer and software updates.

1.7.7 Backup

Exporting/importing system parameters, macros, OP parameters, etc., to/from USB.

1.7.8 System Update

Performing system software updates via a USB device.

1.8 Usage Instructions

1.8.1 Opening and Editing a File

Switching to program editing page and modifying files.

1.8.2 Execute Machining

Starting up the machine and executing the reference point return procedure.

1.8.4 Program Restart

Resuming machining operations after pauses or tool changes.

1.8.5 Automatic Tool Alignment

Automatic tool alignment methods and their setup procedures.

2 Control Panel Operations

2.1 Operating Panel

Describes the design of control panels for M5800 and M6800 series.

2.1.1 M5800 Series

Details the operating panel for the M5800 series.

2.1.2 M6800 Series

Details the operating panel for the M6800 series.

2.4 Mode Selection (MODE SELECTION)

Selecting operating modes: MEM, MDI, MPG, ZRN, JOG, INC JOG.

2.5 Spindle Operation & Spindle Speed Adjustment

Controlling spindle rotation and adjusting its speed.

2.7 Emergency Stop (EMG-STOP)

Stopping all operations in dangerous or emergency situations.

2.8 Program Start (CYCLE START) & Program Pause (FEED HOLD)

Starting program execution and pausing it.