Milling Machine Series
CNC operations
80
Advantech-LNC Technology Co., Ltd.
1.6.8 R value
Description of the R value function:
The R value is the screen for system maintenance variables; this function is to be used by system designers and
maintenance personnel. Users can only view this page, its contents cannot be modified.
Instructions for using the R value:
After using the <DGNOS> key on the MDI panel to switch to diagnosis group, the 【R value】 key can be pressed
to access the R value page.
After entering the R value number you wish to find in the input section, press the 【Find】 key and the cursor will
be moved to the position corresponding to that number.
To Next Page
Loading...