Advantech LNC M5800 Series User Manual

Milling Machine Series
CNC operations
35
Advantech-LNC Technology Co., Ltd.
1.3.11 Program restart
Description of the program restart function:
 When the machining operation is paused due to tool damage, users can record the program line number,
change the tool, then use the program restart function to resuming the machining process; this reduces the time
required for no-load operations and avoids the situation where the workpiece is not in contact with the tool.
Instructions for program restart:
 Users can use the <POS> key on the MDI panel to switch to monitoring group, then press the 【Program restart】
key to enter the program restart page. The program restart function is only available under automatic (MEM)
mode.

Advantech LNC M5800 Series Specifications

General

Brand	Advantech
Model	LNC M5800 Series
Category	Power Tool
Language	English