Advantech LNC M5800 Series User Manual

Milling Machine Series
CNC operations
82
Advantech-LNC Technology Co., Ltd.
1.7 Maintenance group (MAINTE)
1.7.1 User parameters
Description of user parameters:
 It is for setting parameters related to PLC, axial direction software limit, RAPID, JOG, and hand wheel for a dry
run.
Instructions for using user parameters:
 After using the <MAINTE> key on the MDI panel to switch to maintenance group, the 【User parameters】 key
can be pressed to access the user parameters page.
 After moving the cursor to the parameter number you wish to modify, a numerical value can be entered in the
input section before pressing the <Input> key to complete the input procedure. The controller also provides
initialization functions. The 【Initialization】 key can be pressed to restore parameters to their default values; as
for the search function, the parameter number you wish to find should be entered into the input area, then
press the 【Find】 key to quickly search and move the cursor to the position of that number.

Advantech LNC M5800 Series Specifications

General

Brand	Advantech
Model	LNC M5800 Series
Category	Power Tool
Language	English