Advantech LNC M5800 Series User Manual

Milling Machine Series
CNC operations
84
Advantech-LNC Technology Co., Ltd.
1.7.3 Network settings
Description of network settings:
 A PC can be connected to the controller via ReCON related software by changing network settings, such that the
PC can upload/download machining files used by the controller as well as the software update function via
corresponding software.
Instructions on using network settings:
 After using the <MAINTE> key on the MDI panel to switch to maintenance group, the 【Network settings】 key
can be pressed to access the network settings page.
 When setting the IP address, make sure that the first three regional addresses of the PC and controller are
identical.
 For detailed instructions, please refer to section 1.8 for instructions on configuring Network Settings and Connections

Advantech LNC M5800 Series Specifications

General

Brand	Advantech
Model	LNC M5800 Series
Category	Power Tool
Language	English