Advantech LNC M5800 Series User Manual

Milling Machine Series
CNC operations
148
Advantech-LNC Technology Co., Ltd.
1.8.12 Tool offset settings
 Press the <OFFSET> key and the 【Tool management】 key on the human machine page, then press the 【Length】
key to access this function.
 Assume the tool is moving along the Z axis. The tool should be manually (by hand wheel or jog) positioned at the
surface of the workpiece (as shown in the figure below).
 Use arrow keys on the MDI panel to select the tool number requiring an offset, and enter the tool radius in the
input area followed by pressing the <Input> key to enter the compensation value to the radius field of that tool
number.

Advantech LNC M5800 Series Specifications

General

Brand	Advantech
Model	LNC M5800 Series
Category	Power Tool
Language	English