Milling Machine Series
CNC operations
91
Advantech-LNC Technology Co., Ltd.
1.7.9 Tuning functions
Description of high-speed, high-precision functions:
It is for users to set short-cut parameter keys in accordance with various curved surfaces and machining
requirements.
Users can take into consideration machining speed and precision requirements in accordance with the type of
workpiece to be machined before changing the settings.
The numerical values of these settings include linear acceleration/deceleration time, bell-type
acceleration/deceleration time, post acceleration/deceleration time, turning reference speed, and 5 mm arc
permissible speed.
Instructions for using high-speed, high-precision functions:
After using the <MAINTE> key on the MDI panel to switch to maintenance group, the 【Tuning functions】 key
should be pressed before pressing the 【 High-speed/high-precision 】 key to access the
high-speed/high-precision page.
This function is for users to set up machining parameters. Users can choose to place more emphasis on
machining speed or precision in accordance with the type of workpiece to be machined before changing the
settings. The numerical values of these settings include linear acceleration/deceleration time, bell-type
acceleration/deceleration time, post acceleration/deceleration time, turning reference speed, and 5 mm arc
permissible speed.
Arrow keys on the MDI panel can be used to move the cursor to the corresponding field, and a numerical value
can be entered into the input area before pressing the <Input> key to complete the setting.
To Next Page
Loading...
Need help?
General
