Milling Machine Series
CNC operations
92
Advantech-LNC Technology Co., Ltd.
Description of the rigid tapping tuning function:
It is for users to view rigid tapping information and configure relevant parameters.
Instructions for using rigid tapping tuning:
After using the <MAINTE> key on the MDI panel to switch to maintenance group, the 【Tuning functions】 key
should be pressed before pressing the 【Rigid tapping tuning】 key to access the rigid tapping tuning page.
【Guided input】: sets the value of estimated measurement into the offset field.
【Rigid tapping program】: set parameters related to rigid tapping test program.
【Start recording】: start executing rigid tapping program and making a drawing.
To Next Page
Loading...