Milling Machine Series
CNC operations
88
Advantech-LNC Technology Co., Ltd.
1.7.7 Backup
Description of the backup function:
System parameters, macro parameters, OP parameters, ladder diagrams, and user parameters can be exported
to a USB device, or data in a USB drive can be imported into the controller.
Instructions on using backup:
After using the <MAINTE> key on the MDI panel to switch to maintenance group, the 【Backup】 key can be
pressed to access the backup page.
【Import from USB】: import data from a USB device to controller.
【Export to USB】: export system data from controller to a USB device.
To Next Page
Loading...