Milling Machine Series
CNC operations
97
Advantech-LNC Technology Co., Ltd.
1.7.12 Change password
Description of the change password function:
It is for changing the password for accessing the current level The change password function is restricted to only
allow users with higher permission levels to modify passwords for users with lower permission levels. This page
will only be shown to users at this permission level.
Instructions for changing password:
After using the <MAINTE> key on the MDI panel to switch to maintenance group, pressing the 【 > 】 key to
access the change password page via the 【Change password】 key.
The password should be entered into the input area, press the <Input> key and confirm the password to
complete the procedure.
To Next Page
Loading...