iii UTC-318 User Manual
Declaration of Conformity
FCC Class A
This equipment has been tested and found to comply with the limits for a Class A dig-
ital device, pursuant to Part 15 of the FCC Rules. These limits are designed to pro-
vide reasonable protection against harmful interference in residential installations.
This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interfer-
ence to radio communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful interfer-
ence to radio or television reception, which can be determined by turning the equip-
ment off and on again, the user is encouraged to attempt to correct the interference
by implementing one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
Consult your dealer or an experienced radio/TV technician for assistance.
Packing List
Before installing UTC-318, please ensure that the following materials have been
shipped:
1 x UTC-318
Accessories for UTC-318
– 1 x Warranty card
– 1 x Adapter
– 1 x Packet of screws
If any of these items are missing or damaged, contact your distributor or sales repre-
sentative immediately.
Technical Support and Assistance
1. Visit the Advantech website at http://support.advantech.com to obtain the latest
product information.
2. Contact your distributor, sales representative, or Advantech's customer service
center for technical support if you require additional assistance. Please have the
following information ready before calling:
– Product name and serial number
– Description of your peripheral attachments
– Description of your software (operating system, version, application software,
etc.)
– A comprehensive description of the problem
– The exact wording of any error messages
Warning! Any changes or modifications made to the equipment that are not
expressly approved by the relevant standards authority may void your
authority to operate the equipment.