Frame Data Parser for WISE LoRa modules v1.3.7
6
Advantech Co., Ltd., Copyright 2020
1. Introduction
1.1. About This Manual
This document describes the Frame Data Parser for Advantech WISE LoRa modules
(ex: WISE-2410, WISE-4610 series). User could use this sample program in Node-Red
to parse frame data of WISE LoRa modules received in LoRa Gateway. WISE-2410 is a
vibration sensor with LoRa/LoRaWAN wireless technology provided by Advantech. In
this document, we use Advantech WISE-6610 as the gateway to receive frame data
sent from WISE-2410.
For WISE-2410 vibration sensor, amount of FFT (Fast Fourier Transform) data for
each axis is 800. Each FFT data is 2 bytes. If user configures WISE-2410 to send 3 axis
(X, Y, Z) FFT data, there will be 2400 data which is 4800 bytes.
1.2. Requirements
⚫ Web Browser(Google Chrome is recommended)
⚫ WISE-2410 or WISE-4610
⚫ WISE-6610 LoRa/LoRaWan Gateway with Node-Red installed
1.3. Note
This sample program only works for parsing of single module (LoRa node) data.
Parsing of multiple modules data is not supported. In Node-RED, user must subscribe
one MQTT topic which contains only one module data.
To Next Page
Loading...
