Advent MP51 - Using the Timer and Burst; Timer and Burst Mode Selection; Timer and Burst Functionality; Timer Usage Precautions

12
Using the timer and burst
Use the timer to set a delay time period between the time when the shutter button and the moment when the shot is taken is
pressed. Use the burst to take pictures in rapid succession of static images.
Turn the camera on and go to the recording mode.
Open the recording menu.
Press
or to select [ Drive to select [ Drive
Mode] ( operating mode). Mode] ( operating mode).
Change the setting.
Press
or to select a mode
operating and then press the button SET ( adjust) . operating and then press the button SET ( adjust) . operating and then press the button SET ( adjust) . operating and then press the button SET ( adjust) .
Off ( offline) Take a single Off ( offline) Take a single
image.
2 sec. ( 2 seconds): 2 sec. ( 2 seconds):
The shutter opening is delayed 2 seconds.
10 sec. ( 10 seconds): 10 sec. ( 10 seconds):
The shutter opening is delayed 10 seconds.
Double ( double): Double ( double):
Records two images in a shot after pressing the shutter release button 10 and 12 seconds.
Burst ( burst): Burst ( burst):
Keep pressing the shutter button for continuous shots completely. Release the shutter button to stop
imaging.
Press the shutter button to take a picture.
When using the timer function, be sure to use a tripod or place the camera level and stable surface.
4
1
2
3
C
C orC oror nor nn sn ss ands andand jand j
j orj or
or sor ss