Need help?Do you have a question about the ADX FIREFIGHT PRO 23 and is the answer not in the manual?
General| Connectivity | Wired |
|---|---|
| Backlit | Yes |
| Backlight | RGB |
| Keyboard Type | Mechanical |
| Keycaps | ABS |
| Connection | USB |
| Interface | USB |
Read instructions, retain manual, do not disassemble, immerse, or expose to heat/radiation.
Remove items from packaging, retain for disposal, check for included gaming keyboard.
Requires Microsoft Windows 8/10/11 and one available USB port.
Access Esc, F1-F12, and Delete by pressing Fn Key with the desired key.
Control volume (decrease, increase, mute) by pressing Fn Key with designated keys.
Toggle Arrow Keys with Fn+W. Use W/A/S/D for directional input after activation.
Adjust backlight flashing level, on/off, effects (18+1 modes), brightness, and color.
Customize backlight for each key, select colors (8+1), and save settings using Fn+Mode.
Connect keyboard, download software from downloads.adxgaming.com, run installer, launch ADX HUB.exe.
Launch ADX HUB.exe and select 'Keyboard' then 'ADXMK0823' to access the interface.
Select 'Customise' for settings, save preferences in 'Profile', and apply or reset changes.
Access 'Light' to adjust Mode, Brightness, Speed, and Color Mode; apply or reset settings.
Create new macros, record input, edit commands, and save via 'Macro' tab; apply or reset.
Select 'Light Effect' to synchronize multiple devices; choose Mode, Brightness, and Speed.
Ensure USB plug is secure; re-insert if unit is not functioning correctly.
Model ADXMK0823, Dimensions 293.6x103.7x42.3 mm, Net Weight 608g.
To Next Page
