Page 10 ACM Series Dehumidifying Dryers
1-4 Standard Features
; Electrical solenoid valve
; Drying temperature range of 160ºF to 400ºF.
; Mitsubishi programmable relay controller
; Display of process temperature set point and actual settings
; Process thermocouple to be connected to drying hopper air
inlet.
; Nema 12 control enclosure
• NFPA79 machinery electrical standards
• Non-fused electrical disconnect
• Branch fusing
• Mercury process heater contactor
• Regeneration temperature control
• Process high temperature alarm light
• Process/regeneration heater box
• High temperature safety system (Process/Regeneration)
1-5 Options
Options can tailor your AEC dehumidifying dryer to meet the
exact requirements of the drying task being performed.
; Process temperature up to 400ºF (or below 160ºF), including
pyrex sight glass and silicone insulated delivery hose.
; If the dryer is a central dry air generator, it will not have a
process heater box.
; Machine mount adapter to accommodate a dryer and
corresponding hopper.
; Drawer magnet, stainless steel construction.
; Casters, two (2) fixed and two (2) swivel.
To Next Page
Loading...
