AEC R5KL1 - 8.2.4 Operation parameters

Setting Setting
56
57
⑦ Battery capacity
Interface Description
This value is the capacity of lead-acid
batteries with a range of 50~1000;
8.2.3 Grid standard
Interface Description
Press UP/DOWN button to move
corresponding options. Here are eleven
countries for selection, including China,
Germany, Australia, Italy, Spain and U.K.;
Press ENTER button to confirm the
selection and enter restart interface (refer
to 8.4);
Press ESC button to cancel the selection
and return to setting interface (refer to
8.2).
8.2.4 Operation parameters
Interface Description
Press UP/DOWN button to move
corresponding options;
Press Enter to enter the selected menu;
Press ESC button to return to setting
interface (refer to 8.2). Options include
reactive compensation mode, grid power,
discharge/charge power, low/high grid
power, low/high grid voltage and low/high
grid frequency. (see from①to⑦)
--BAT CAP--
INPUT： 0100
UNIT： AH
--GRID STD--
→ 1：China
2：Germany
3：Australia
4：Italy
…
13：Thailand
14：Local
15：60Hz
--RUN SETTING--
→ 1：REACT POWER
2：GRID POWER
3：DISC POWER
4：VAC-MIN
5：VAC-MAX
6：FAC-MIN
7：FAC-MAX
① Reactive mode
Interface Description
Press UP/DOWN button to move
corresponding options;
Press Enter to confirm the input and enter
power factor setting interface;
(select 2, press Enter to confirm input and
enter reactive power interface; Select 3, 4,
the corresponding mode will be selected
and return to the parameter setting
interface.)
Press ESC button to cancel the input and
return to operation parameters interface.
Power factor setting
Interface Description
Press UP/DOWN to increase or decrease
the input figure;
Press ENTER button to confirm or ESC
button to cancel the input and return to
working interface;
The input value should range between
L0.80 and L0.99 or C0.8 and C1.00.
Reactive Power
Interface Description
Press UP/DOWN button to adjust the input
figure;
Press ENTER button to confirm or ESC
button to cancel the input and return to
working interface;
The input value should range between
-60% and +60%, which varies with the
standard.
-REACT MODE-
→1：POWER FACTOR
2：REACT POWER
3：QU WAVE
4：QP WAVE
-POWER FACTOR-
INPUT: C1.00
Value range
(L1.00~C1.00)
-REACT POWER-
INPUT: +60%
Value range
(-60%~+60%)