AED IONOMAT 1 - Disinfection; Home Use; Use in a Professional Environment

IONOMAT 1
Page 10 sur 14
- Never put the cables in water or disinfectant.
8.2 Disinfection
8.2.1 Home use:
Treatment of hyperhidrosis:
- Disinfect the trays, biocompatible grids and electrodes every 10 sessions with diluted
bleach.
Warts treatment:
- Disinfect the trays, biocompatible grids and electrodes between each session with
diluted bleach.
8.2.2. Use in a professional environment:
Treatment of hyperhidrosis or warts:
- Disinfect the tubs and sponges and electrodes between each patient with water using the
recommended products: Streranios 2%, Hexanios G+R or Alcohol 70%.
- Refer to the instructions for the products used.
4.1 Storage of the Dispense
1) Once the treatment is complete, disconnect the medical device, empty the water from the
trays and dry the electrodes and trays
2) Store the device in its case (if applicable) in this order:
- Place the electrodes at the bottom of the case.
- Place over the bins
- Place the generator in the trays and surround the trays with the power cable and the cables
connecting the electrodes
Or store the device in a suitable place so as not to damage it.