EasyManua.ls Logo

AED IONOMAT 1 - Page 3

AED IONOMAT 1
14 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
IONOMAT 1
Page 3 sur 14
1 General description and intended use of IONOMAT 1
IONOMAT 1 is intended for the treatment of perspiration of the hands, feet or armpits by
ionophoresis, it also allows the treatment of warts of the feet and hands.
Iontophoresis is one of the most effective methods to combat sweating. It works with water to
transmit a small flow of 10 to 20 mA electrical current to the skin surface (through the feet or
hands placed on electrodes with 2 cm of ordinary water).
The electrical current released by the machine has one purpose: to microscopically thicken the
surface layer of the skin in order to block the production of perspiration.
The ionophoresis method consists of placing the areas to be treated (feet, hands, etc.) in tanks
containing water and operating the device.
For the armpits, it is a matter of placing small electrodes on wet sponges, putting them under
your arms and activating the machine.
The treatment of perspiration gives satisfactory results after a period of between 4 and 10
weeks, respecting the frequency of sessions indicated in this manual.
For the treatment of warts, one tablespoon of sodium salicylate is added to the water on the
affected side.
2 Contents of the box
The Generator
2 Cables with
crocodile clips
Bins (2 or 3 litres)
2 Cables with
crocodile clips
Biocompatible
grids
2 Storage Case
2 Stainless steel
electrodes