AEE Magicam S50+ - Settings; Camera Settings Configuration

14
aee.com
DE
EN
ES
PT
IT
EL
FR
NL
PL
CS
HU
SV
FI
NO
RU
DA
Settings
To set parameters, perform the following operations
a. Press"M"keytoenterthecamerasettingmenu;
b. Press"<"/">"keytoselect" ";
c. Press"-"/"+"keytomovebluecursortothesub-menuyouwanttoconfigure,Press"OK"
key to confirm;
• Warning Tone
Adjusttheloudnessormuteofbuzzer.threemodesareavailable:Off,Medium(50%)and
Standard(100%).
• Status Indicator
Activateordeactivatethestatusindicators.threemodesareavailable:Off(AllOFF),Two
(Onlyfrontcoverandtopcover)andOn(AllON).
• On Screen Display
Display or hide the recording icons or information on the display screen.
• Video Content Loop
Youcanactivateordeactivatelooprecordingfunction.IfON,videofilewillbe
automaticallystoredinsegmentof15minutes;IfOFF,videofilewillbestoredinsegment
of 25 minutes.
• Auto To Standby
S50+ is set to automatically enter standby mode if no operation is (photo shooting,
video recording or key operation) carried out in certain time. If any operation is carried
out in the timing process, the timer will be reset. Under standby mode, press video
recordingkey/shutterkey/stopkeytoawakenS50+.TheavailablemodesoptionsareOff,
2 minutes, 5 minutes and 10 minutes.
• TV Output Format
This setting is designed to ensure that the frame rate of video recording matches with the
playbackformatofonTV.
• Language
select the required language.
• Date/Time
You can adjust the date and time, which are overlapped in the bottom-right corner of a
video or shooting file during video recording or shooting.
• Format
This option allows all the files in the memory is cleared.
• Recover Factory Setting
This option allows all the settings of the system to be restored to original factory settings.