Note: If no memory card is inserted, the video camera formats its built-in memory. If a memory card is inserted,
the video camera formats the memory card rather than its memory.
l Recover factory setting (default): This parameter restores all parameter settings to the factory settings.
After you set this parameter, the system displays all the menu options in English. Press the M key to
display menu options. Press the < or > key to display the System Setup menu. Press the – key, and
choose Language. Then set the system in your desired language. After resetting to the factory setting,
the system displays 01/01/2012 00:00 for the time.
m Ver: This parameter only shows the version number of the software used on the video camera.
Note: When selecting a state from a submenu, press the M key for a backward operation, and press OK for
confirmation.
To Next Page
Loading...
