EasyManua.ls Logo

AEG B9820-5 - Installation Instructions; Installer Safety Guidelines

AEG B9820-5
68 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
61Installation Instructions
Installation Instructions
1
Important: The new appliance may only be installed and connected by an au-
thorised service engineer.
The warranty does not cover any faults resulting from improper installation or
repairs.
1 Safety Instructions for the Installer
A device must be provided in the electrical installation which allows the appli-
ance to be disconnected from the mains at all poles with a contact opening
width of at least 3 mm.
Suitable isolation devices are, for example, circuit breakers, fuses (screw-type
fuses are to be removed from the holder), earth leakage trips and contactors.
The installation must guarantee shock protection.
The stability of the unit in which the appliance is fitted must satisfy the re-
quirements of DIN 68930.
Built-in ovens and hobs are fitted with special connector systems. They may
only be combined with appliances with a matching system.