37Operating the Oven
Adjusting SETTINGS MENU
1. Using the OPTION button, open the Options menu.
2. Using the arrow buttons or select the menu option SETTINGS MENU.
3. Using the OK button, change to the SETTINGS MENU menu.
4. Using the arrow buttons or go to the setting that you want to adjust.
5. Press the OK button.
The value currently set appears in the display.
6. Using the arrow buttons or select the desired value.
7. Press the OK button.
In the display SAVED appears for a few seconds.
Afterwards, you will find yourself back in the Oven Functions menu.
Everyday use of the SETTINGS MENU
Smell filter
3 The energy consumption is higher when the smell filter is activated.
3 If the smell filter is deactivated in the SETTINGS MENU menu, it will automati-
cally switch itself on after 100 operating hours, during a baking or roasting cy-
cle, in order to self-clean.
3 During pyrolytic cleaning, the smell filter switches itself on automatically, even
if it is deactivated in the SETTINGS MENU menu.
Heat+Hold
The Heat+Hold function keeps your prepared dish warm for 30 minutes, after
the baking or roasting process is completed.
This is helpful, for example, if your guests are late.
Pre-condition for Heat+Hold:
• Set temperature is above 80°C
• Fixed duration
Switching on Heat+Hold
1. Select oven function, meat programme or automatic programme.
2. If necessary, set duration or core temperature.
3. Press the SELECTION button repeatedly until HEAT+HOLD flashes.
LANGUAGE MENU
– ENGLISH
– ...
For setting the language in the display.
FACTORY SETTINGS
– RESTORE SETTINGS For restoring all settings to the status as at the time of delivery.
To Next Page
Loading...
