AEG B9879-5 - Performing Pyrolytic Cleaning

Cleaning and care50
Performing Pyrolytic cleaning
1 Warning: The oven gets very hot during this process. Keep small children away.
1 Important Before carrying out the pyrolytic cleaning process, all removable
parts, including the side rails, must be removed from the oven.
3 If you use the oven shelf runners that are available as special accessories, these
must be removed before pyrolytic cleaning.
If the side rails/oven shelf runners are still in place, ‘C1-REMOVE RUNNERS’ ap-
pears in the time display.
The pyrolytic cleaning process then cannot be started due to a safety cut-out
that protects the side rails/oven shelf runners.
Performing pyrolytic cleaning
1. First remove the worst of the residue manually.
2. Using the OPTION button, change to the Options menu.
3. Using the arrow buttons or
select the menu option CLEANING
MENU.
4. Confirm using the OK button.
5. Confirm suggested cleaning func-
tion PYROLUXE MENU using the OK
button.
_____
CLEANING MENU
ý ý ý ýþ ýþ ý
ý ý
ý
ý
ý ý
888ûcþ þüþ1ü5.0ü5
ý
88.8ú8
wPmP¸¹º»¼-+
___
PYROLUXE MENU
ý ý ý ýþ ýþ ý
ý ý
ý
ý
ý ý
888ûcþ þüþ1ü5.0ü5
ý
88.8ú8
wm¸¹Pº»¼-+
____
PYROLUXE LIGHT
ý ý ý ýþ ýþ ý
í ý
ý
ý
ý ý
888ûcþ þüþ1ü5.0ü5
ý
02.15
wm¸¹Pº»¼-+