3. An acoustic signal sounds.
SAFE goes on in the display when you touch any key.
If the oven has "Pyro Cleaning" function, the door is locked.
Control Lock
The Control Lock prevents you to accidentally change the oven functions.
You can activate the Control Lock only when the appliance operates.
Activate the Control Lock:
1. If necessary, activate the appliance.
2. Do the necessary settings.
3. Touch and hold
and at the same time.
Loc goes on in the display. The Control Lock is on.
To deactivate the Control Lock, touch and hold and at the same time.
The Control Lock does not prevent you accidentally deactivate the appliance. If you deacti-
vate the appliance, the Control Lock is off.
Settings menu
The settings menu lets you to add or remove functions from the main menu (for example:
you can set on or off the Residual heat indicator). Settings menu has maximum eight set-
tings (from SET1 to SET7). The number of the settings is different for different models. Look
into the table below to see the possible value of each setting.
Settings menu
Indicator of the setting menu Description Value to set
SET1 SET+GO ON/OFF
SET2 RESIDUAL HEAT INDICATOR ON/OFF
SET3 KEY TONE CLIC/BEEP/OFF
SET4 FAULTY TONE ON/OFF
SET5 SERVICE MENU ON/OFF
SET6 RESTORE SETTINGS YES/NO
SET7
1)
TIME EXTENSION ON/OFF
1) Selected models only
You can set the settings menu only when the appliance is off.
Activate the Settings menu:
1. If necessary, deactivate the appliance
.
2. Touch and hold
for three seconds.
The display shows "SET1" and "1" flashes.
3. Touch
/ to set the setting.
20 Additional functions
To Next Page
Loading...
