Do the same with the second glass panel
(C).
Clean the glass panels with water and soap.
Dry the glass panels carefully.
Installing the glass panels
After you clean the door, install the glass panels in the opposite sequence.
Make sure that you put the middle panel of glass in the correct seats and in the rubber
distance holders (D). Refer to the illustration.
D
D
BE7714000
D
D
BE7614000
The middle panel has a dot in one of the corners. When you install this panel, make sure
that the dot is in the top left corner of the glass panel.
The first glass panel has a decorative frame. When you install this panel, make sure that the
screen-printing is on the outer side. Make sure that the surface of the glass panel frame is
not rough when you touch it.
C
Care and cleaning 25
To Next Page
Loading...
