AEG BMT 60 - Guarantee; Fault Elimination for the User

10
3. Guarantee
4. Fault elimination for the user
For guarantees please refer to the respective
terms and conditions of supply for your
country.
The installation, electrical
connection and rst operation of
this appliance should be carried out by a
qualied installer.
The company does not accept liability
for failure of any good supplied which
have not been installed and operated
in accordance with the manufacturer’s
instructions.
Fault Cause Rectication
No hot water - Circuit breaker o
- Safety thermal cut-out
tripped
- Turn circuit breaker on
- Reset thermal cut-out
Water not hot enough - Water ow too high
- Voltage too low
- Reduce water ow rate
- Supply connect volt
age to unit