Only for selected
countries
In case of exhaust
installation a window switch
might be required (consult
an authorised technician).
You need to buy it
separately as it is not
supplied with the hob. The
window switch has to be
installed by an authorised
technician. Refer to the
installation booklet.
If the appliance is installed above a
drawer, the hob ventilation can warm up
the items stored in the drawer during the
cooking process.
Find the video tutorial "How to install
your AEG Extractor Hob" by typing out
the full name indicated in the graphic
below.
www.youtube.com/electrolux
www.youtube.com/aeg
How to install your AEG
Extractor Hob
Filter housing assembly
Before the first use make sure to insert
the filter inside the housing with the black
sides facing inwards and the silver sides
facing outwards. Refer to "Cleaning the
hood filter". Once the filter housing is
assembled, put it inside the hood system
and place the grid on the hood.
3.5 Connection cable
• The hob is supplied with a connection
cable.
• To replace the damaged mains cable,
use the cable type: H05V2V2-F which
withstands a temperature of 90 °C or
higher. Contact an Authorised Service
Centre. The connection cable may
only be replaced by a qualified
electrician.
ENGLISH 9
To Next Page
Loading...
