Operating Instructions
14
Operating the Oven
Inserting the Shelf and Universal Sheet
All slide-in parts have a small
protrusion on the right and left.
This protrusion is an anti-tip
device and must point down-
wards.
Inserting a Shelf
0 Insert the shelf such that the two
guide rails point upwards. The
anti-tip device must point down-
wards and be in the rear of the
oven.
Inserting the Shelf and Sheet
0 When the shelf and universal
sheet are used together, carefully
place the shelf anti-tip device in
the protuberances on the sheet.
To Next Page