15
Inserting/Removing the Grease Filter
Only use the grease filter when
roasting to protect the rear heating
elements from fat splashes.
Additional functions
Either the Countdown or the Meat
probe can be set.
3 General Hints
• After a function has been selected, the display flashes for about
5 seconds. While it flashes, the desired time can be set using the
or buttons.
• When the desired time has been set, the display flashes for another
5 seconds. The set time begins to run.
• Press any of the buttons to stop the signal.
Inserting the grease filter
Hold the grease filter by the
grip and insert the two mounts
downwards into the opening on
the rear wall of theoven (fan
opening).
Taking out the grease filter
Hold the grease filter by the
grip and unhook it.
Countdown
Setting the timer.
Meat probe
Setting the core temperature.
Temperature / Time Display
Settings buttons
To Next Page
Loading...
