Step 1 Turn off the oven and wait until it is
cold.
Step 2 Pull the front of the shelf support
away from the side wall.
Step 3 Pull the rear end of the shelf support
away from the side wall and remove
it.
Step 4 Install the shelf supports in the oppo‐
site sequence.
11.4 How to use: Pyrolytic Cleaning
Clean the oven with Pyrolytic Cleaning.
WARNING!
There is a risk of burns.
CAUTION!
If a hob is installed above the oven or if
there are other appliances installed in the
same cabinet, do not use them at the
same time as this function. It can cause
damage to the oven.
Before the Pyrolytic Cleaning:
Turn off the oven and wait until
it is cold.
Remove all accessories and remova‐
ble shelf supports.
Clean the oven floor and the inner door
glass with warm water, a soft cloth and
a mild detergent.
Pyrolytic Cleaning
Step 1
Enter menu: Cleaning .
Option Duration
C1 - Light cleaning 1 h
C2 - Normal cleaning 1 h 30 min
C3 - Thorough cleaning 3 h
Step 2
- press to select the cleaning programme.
Step 3
- press to start the cleaning.
Step 4 After cleaning, turn the knob for the heating functions to the off position.
22 ENGLISH
To Next Page
Loading...
Need help?
General