6.2 Display
A. The digital indicator can show:
• Programme duration (e. g. ).
• Delay time (e. g. ).
• Cycle end ( ).
• Warning code (e.g.
).
• Indication of total operating hours of
the appliance. Refer to the "Operating
hours counter" section in the
"Settings" paragraph for more details.
B. Extra rinse indicator. It lights on
when this option is selected .
C. This indicator blink during the laundry
load detections.
D. Child safety lock indicator.
E.
Door locked indicator.
7. DIAL AND BUTTONS
7.1 Aan /Uit - Marche/Arrêt
Pressing this button for a few seconds allows
to activate or deactivate the appliance. Two
different tunes sound while switching the
appliance on or off.
As the Stand-by function automatically
deactivates the appliance to decrease the
energy consumption in a few cases, you may
need to activate the appliance again.
For more details, refer to Stand-by paragraph
in Daily Use chapter.
7.2 Introduction
The options/functions are not selectable
with all washing programmes. Check the
compatibility between options/functions
and washing programmes in the
"Programme Chart". An option/function
can exclude another one, in this case the
appliance doesn't allow you to set the
incompatible options/functions together.
Make sure the screen and touch buttons
are always clean and dry.
7.3 Temp.
When you select a washing programme, the
appliance automatically proposes a default
temperature.
Set this option to change the default
temperature.
The indicator
= cold water of the set
temperature comes on (the appliance does
not heat the water).
7.4 Centrifugeren - Essorage
When you set a programme, the appliance
automatically sets the maximum spin speed
allowed.
Touch repeatedly this button to:
Activate the Rinse Hold
option
• Set this option to prevent the laundry
creases.
• The related indicator comes on.
• There is a water in the drum when the
programme is completed.
• The door stays locked and the drum turns
regularly to reduce creasing.
• You must drain the water to unlock the
door.
ENGLISH 45
To Next Page
Loading...
