AEG LF62CS86 - Cleaning the Inlet Hose and the Valve Filter

3.
180˚
4.
2
1
5. 6.
7.
2
1
8.
2
1
1
WARNING!
Make sure that the impeller of the pump can rotate. If it does not rotate, contact the
Authorised Service Centre. Make sure also that you tighten the filter correctly to prevent
leakages.
11.10 Cleaning the inlet hose and
the valve filter
It is recommended to clean both the filters of
the inlet hose and valve twice a year to
remove any deposit, collected over the time.
Proceed as described in following diagrams
to clean filters:
1. Remove the inlet hose from the tap and
clean the filter.
ENGLISH 57