8.3 Handset LCD Display Icons and Symbols(see P2)
The LCD display gives you information on the current status of the
telephone.
More blocks indicate a stronger reception signal.
Less blocks indicate a weaker reception signal.
Indicates a call is in progress.
Flashes when there is an incoming call.
Indicate that the ringer is switched off.
Steady when an alarm is set.
Indicate that the keypad is locked.
Indicate when the battery is fully charged.
Whole icon flashes when the battery charging. Internal
block icon flashes when the battery is in final charging stage.
Indicate when the battery needs charging.
Flash when low battery power level is detected.
Indicate new call in call list.
Indicates the speakerphone is turned on.
8.4 Menu Structure
In idle mode, press
M
to show CALL LIST, the first option in the
Main Menu list.
Press = to go to other options in the menu list.
Press
M
to enter a sub-menu or function.
Press
m
to go back to the previous level.
Press and hold
m
to cancel the current operation and return to the
idle screen.
Note: If you do not press any key on the handset for 30 seconds, the
display will automatically return to the idle screen.
Refer to the following for the menu structure.
10
To Next Page
Loading...
Need help?
General
