•Press
M
and . to select INT RING.
•Press
M
and . to select the desired ringer melody.
NOTE
The respective ringer melody will play as you step through the melody
list.
•Press
M
to confirm your choice.
11.2.5 Set the Ringer Volume
You can set the handset ringer volume level to one of 6 ringer volume
levels including VOLUME OFF .
•In idle mode, press
M
and . to select HS SETTINGS.
•Press
M
and . to select RING SETUP.
•Press
M
and . to select RING VOLUME.
•Press
M
and . to select the ringer volume
NOTE
The respective ringer volume will play during your selection.
•Press
M
to confirm your choice.
11.2.6 Set Alert Tones
Three different alert tones are on by default, but can be set off, if
desired.
Key Tone - a single beep is emitted when you press a key.
Low Battery Tone - emitted while talking on the phone to alert you to
charge the handset batteries.
Out of Range Tone - emitted while talking on the phone to alert you
to move closer to the base unit, before the call is lost.
•In idle mode, press
M
and . to select HS SETTINGS.
•Press
M
and . to select TONE SETUP.
•Press
M
and . to select KEY TONE, BATTERY TONE or
OUT OF RANGE.
•Press
M
and . to select ON or OFF for these tones.
•Press
M
to confirm your setting.
NOTE
If you want to change the language back to English, press
M
and
then<*364#>inidlemode.